NEO FLEX J-10
NEO FLEX J–10 Function lnk for hiding a design
NEO FLEX J–10 Ink is used for hiding over a screen-printed design or an offset printed design, by screen printing on the fullsurface ink for hiding the screen printing on the full surface or partially according to each purpose.
When we put water on design over-printed by NEO FLEX J–10, the under design will be visible through NEO FLEX J–10.On the other hand, when there is no moisture on the design, the under design will be invisible again.
NEO FLEX J–10 is the reversible function ink for hiding the under design.
PRINTING METHOD
Printing Mesh : 50 ~ 100 mesh for water-based ink
* In order to improve the opacity, we would recommend doing pre-drying after printing and print NEO FLEX J-10 on the same design again.
DRYING CONDITIONS
Drying at the room temperature
USES
- Label - Applique - Calendars, etc
- Seal - Toy
STORAGE
NEO FLEX J-10 is a water-based ink. Please kindly pay attention to freezing of this ink in the winter season.
SUBSTRATES TO BE PRINTED
- Acrylic, PVC, Polycarbonate, etc
- In case of printing on absorbent paper and cloth, please print NEO FLEX J-10 after cover coating the design with water resistant ink.
PROPERTY
- NEO FLEX J-10 is a water-based ink. Please use the screen printing mesh for water-based ink.
- Please use water for dilution. In case the drying speed is too fast, please add Glycols slightly into water.
