- Appearance : Milky white paste
- Solid content : 62 + 2 (%)
- Viscosity : 270 + 50 (Pa·S)
- P H : 270 + 50 (Pa·S)
- Print as it is due to one-component type
- Mesh : 50 ~ 100 mesh
- Drying condition : Dried to be tranaparent of coated film (Normally, 100°C – about 2 min.)
- Adhesive property : 1000 (g/25mm)
- Jis Standard : Stainless steel board, peeling by 180°C at 300mm/min.
- It isadhesive agent of acrylic water-based emulsion type.
- It has excellent viscosity and printability applied for screen printing.
- It is easy to adhere on any objects due to strong adhesive property.
- It is excellent for drying property due to high solid.
- It is best for both sides adhesive tape.
- Please pay attention to storage for avoiding performance deterioration due to freezing in the cold region.
