PP - X (NEW) SERIES INK
PP–X Ink is the screen printing ink of air-drying type which has good adhesion to treated Polyolefine and PP corrugated plastic materials, and has excellent printing property and gloss.
INK TYPE :
- Air–Drying inks and low odor
USES :
- Treated Poly Propylene
FEATURE :
- Excellent adhesion to Polyolefine meterials.
- Low odor and excellent gloss.
- Excellent hardness of coating film after printing.
PRINTING CONDITION :
- We recommend to use Polyester 200-300 meshes.
PRINTING :
- In the case of using Polyester 300 meshes ; you can print 50-60 m2 with 1 kg. of the ink.
DILUENT :
- Solvent No. 25 (quick-drying)
- Solvent No. 41 (standard)
- Solvent No. 42 (slow-drying)
** Please use these solvent at the dilution ratio of 10~20% against the PP-X main agent.
DRYING CONDITIONS :
- Room temperature 20 C x Approx. 30-40 min.
PERFOMANCE LIST FOR PP-X COATING FILM
| Testing Item | Testing result | Condition |
|---|---|---|
| Drying | 30-40 mins. 30-40 mins. | At room temp. 20°C At room temp. 35°C |
| Adhesion | 100/100 | Peeling test at crosscut using cellophane tape. |
| Scratch | Δ ~ O | Scratch with fingernails. |
| Blocking | Δ ~ O | Have the printed surface touched each other and piled up |
| Water resistance | O | Soaked in tap water for 300 hours |
| Light resistance | O | Fade-meter, 400 hours |
| Testing Item | Testing result | Condition |
|---|---|---|
| Drying | 30-40 mins. 30-40 mins. | At room temp. 20°C At room temp. 35°C |
| Adhesion | 100/100 | Peeling test at crosscut using cellophane tape. |
| Scratch | Δ ~ O | Scratch with fingernails. |
| Blocking | Δ ~ O | Have the printed surface touched each other and piled up |
| Water resistance | O | Soaked in tap water for 300 hours |
| Light resistance | O | Fade-meter, 400 hours |
TESTING CONDITIONS :
- * Materials : PP sheet, PP Corrugated plastic
- * Drying : 1 week at room temperature 20°C after printing
REMARK :
As Polyolefine materials may differ in quality according to each maker or making lot, Please kindly be sure to effect the pre-test before printing.The adhesion ability of Polyolefine materials will be improved by effecting corona discharge treatment.